Important to Know……
Senate Bill 183 Lowenthal (SB183) created the Carbon Monoxide Poisoning Prevention Act of 2010 (Act). The Act requires carbon monoxide (CO) detectors to be installed in every dwelling unit intended for human occupancy. A CO detector is a device that detects the presence of CO and emits a loud noise to alert occupants that CO is present in order to prevent CO poisoning. Detection in a home environment is impossible without a warning device because CO is odorless, tasteless, colorless, and invisible. It is often referred to as the “silent killer” because it is virtually undetectable without using a carbon monoxide detector.
Placement and location of carbon monoxide detectors in the dwelling is not clearly spelled out in the Act. This may be determined in the packaging of the carbon monoxide detector which can be purchased at any hardware or home store. Installation locations may vary depending on the manufacturer and depending on the type or design of the detector. Since instructions will be specific to the carbon monoxide detector you purchase, be sure to read all of the instructions before attempting to install the device.
There are some general guidelines regardless of which type of carbon monoxide detector you use:
· CO devices should be placed on every level of the property
· CO devices should be placed within 10-15 feet outside of each individual sleeping room
· CO devices can be placed on the wall or the ceiling, depending on packaging placement instructions
· CO devices should not be placed where children or pets can get to them and may do damage
· CO devices should not be placed in areas of direct sunlight or areas of extreme temperatures
· CO devices should not be placed behind anything that will obstruct or inhibit the device from working properly
For more information you can explore the website of the Center for Disease Control and Prevention:
To find property in the Point Loma area click here
No comments:
Post a Comment